-40%
Kicker 46KISLOAD2 Smart radio interface 25ohm load/2ch 40v
$ 25.56
- Description
- Size Guide
Description
What's in the boxSmart-Radio interface
Two 11" 2-channel speaker wire harnesses (input/output)
Four 15mm screws
About this item
Written by Crutchfield's Buck Pomerantz
Ensure signal flow
Factory stereo systems are getting smarter and smarter these days — which unfortunately makes adding aftermarket amplifiers and processors more difficult. Often, the most convenient place to get audio signal is from a factory amplifier's output, which shuts down or distorts when the speakers are disconnected. Kicker's KISLOAD2 smart radio interface solves this issue by providing the resistive load the amp needs to operate properly, and passing the signal along without any distortion or loss of power.
High power
The KISLOAD2 can handle up to 400 watts RMS of power per channel, so it'll work well with a high-powered factory sub amp. Just make sure your line-output converter or your amplifier's speaker-level input can also handle that amount of power. Warranty: 1 year.